Barebones 0.5W to 5W Drive Kit The gain is about 20

The gain is about 20 dB with the output stage alone and about 40 dB with the MMIC

Increases the output from 50W to 90-100W on 160-10M and 60-70W on 6M

Many applications require no external processor at all

com/site/dds25infosite/

Elecraft or ELAD dongles and need 5V on pin 1 for power

Barebones 0.5W to 5W Drive Kit The gain is about 20New REV C Version Increases the use of SMT components, reducing build time and complexity no transformer to wind. Uses the ATU mounting holes so no drilling is required. 0. 5 watts to 5 wattsDriverkit, which can be used as a final amplifier for a QRP project or to upgrade an existing HARDROCK 50 that was purchased without thedriver. SMT parts come pre soldered, and the following through hole parts are supplied: 1 x RD16HHF1 1 x 6" RG 316 2 x 2 pin