JT Lite JT2 10' 6" JUMBOTRAC This eight arm fitting serves

This eight arm fitting serves as the crown fitting for all square

These locations often receive the brunt of the damage during installation and the Keder Leader is designed to take the wear and tear and be replaced rather than repairing or replacing keder of the primary roof panel

This is an adjustable baseplate for the Jumbotrac system

Included with each top is a canvas storage bag and eight (8) rope tensioners to tension top to the baseplates

or lightweight décor

JT Lite JT2 10' 6" JUMBOTRAC This eight arm fitting servesThis kedered aluminum tubing is used as a rafter in the Jumbotrac Lite 20' wide frame tent system. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional hole in the center of the extrusion. Specifications: Base Material: 2. 72" x 2. 06" JT2 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall