Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking Ingestion-build-221493 minimum design coefficient and calculation

minimum design coefficient and calculation method are based on the resistance to internal pressure with water at 20 °C for 50 years

normal service

this part of ISO 11042 requires that the following parameters be continuously monitored: emissions

or in the separation of two or more liquids having different boiling points and lubricating oil from crude oil

that are designed for use with a variety of flexible and semi-rigid coaxial cables and rigid coaxial lines

Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking Ingestion-build-221493 minimum design coefficient and calculation1 Scope This International Standard describes a method of baking green test specimens made by compacting carbonaceous ramming pastes. It includes the baking procedure (heating rate and holding time) and the determination of the loss on baking (relative mass loss). Baked test specimens of ramming paste need to be prepared for the determination of properties after baking, for instance apparent density, crushing strength and porosity.