PTK7308 Plywood Servo Mounting frame flying wing Printed in PETG filament with

Printed in PETG filament with structural ribs designed into the one piece

Losing altitude quickly is best done by holding the model in a tight turn with some down elevator in

Magnets for the Hatch Catch

Balsa Sheet Fin

These Kavan modelling pins feature an extra-fine needle that glides into wood without damage

PTK7308 Plywood Servo Mounting frame flying wing Printed in PETG filament withLightweight Poplar plywood servo mounting frame for the PTK7308 servo Laser cut 2. 8mm Poplar plywood. Supplied as a pack of 2 servo frames How To Mount Wing Servos Using Ply Frames 1. Glue a strip of 3mm (or 1 8) balsa to the leading edge of the mount (width dependant on the distance the mount is likely to be behind the main spar). 2. Place the mount with the servo in situ in the wing and abut it against the rear of the main spar. 3. Slide the mount