Hardrace Uprated Front Wishbone Set ST225. Suspension The mount can be wound

The mount can be wound up and down the damper body to give a full range of adjustment from near standard ride height to so low it wouldn’t be drivable on the road

Over time the lower mount splits under the heavy loads

Gasket Coating

PTFE lubricant

4" Carbon fibre

Hardrace Uprated Front Wishbone Set ST225. Suspension The mount can be woundUprated front wishbones with harden rubber bushes. Ball joints etc are not included but you can get either OE fitment uprated 21mm or 18mm or our roll centre adjusters 21mm or 18mm with the longer tie rod ends to correct the roll centre on lowered cars. Please note you will need an M6 nut and bolt to hold the height sensor arm onto the right wishbone. Please measure the widest part of the original taper which will be under the rubber seal. There are 2