Data Rig Compression Points This unique design combination allows

This unique design combination allows for the female threaded end of the connector to be easily manuvered in order to quickly "FIND" the male thread of the shaft and be connected to it

The push cap is attached directly to the PVC pipe that is ready to be installed after all of the Bullet Mole shafts are removed

All shafts points and caps are interchangeable

This allows the hole to be opened from a shallow hole on the edge of the sidewalk and then travel deeper to clear the bottom of the curb and gutter and exit into the micro trench or pot hole in the road

As the shafts are extracted the tape or line is pulled into the hole which can then be attached to the microduct and installed

Data Rig Compression Points This unique design combination allowsThis rig is used to punch holes and install micro duct from the edge of the sidewalk to the road with very minimal disturbance to the lawn next to the sidewalk. It requires a very shallow and short entrance trench approx 6 Inches deep and 24 to 30 inches long depending on the angle. The rig itself attaches to the sidewalk and does not require that stakes or anchoring devices be driven into the property owners soil next to the sidewalk The trajectory